文章
  • 文章
Search

Jinhua Ai Kou Protective Equipment Co., Ltd  

Home >> Product >>Particle Filtering Half Mask >> Particle Filtering Half Mask
Product Detail

Particle Filtering Half Mask

Model
Collect
Model AK001
  • product description


Description

Product name: Particle Filtering Half  Mask
Model:

AK001

Product description:Cup shape half mask with elastic headharness,no valves,external metal nose clip
Product specification:127mm*138mm*49 mm
Executive Standard:EN149:2001+A1:2009 FFP2 NR
Product Performance:PFE ≥ 94
Main Ingredients:84.5% Needle-punched cotton,15.5% Melt-blown fabric 
Store condition:Temperature<50℃, Humidity<80%
Shelf Life:3 years


Important:

The protective masks have been designed to meet the requirements of REGULATION  (EU)2016/425 and harmonies standard EN149:2001+A1:2009.


User instruction:

1. To protect your health and to prevent serious injury or death, it is important to read all follow the instruction provided with the enclosed product. Please real all warning printed on the packaging box.

2. The mask needed to be inspected prior to each use to assure there are no holes in the breathing zone other than punctures around and staples and no damaged has occurred.

                                      

Fitting instruction:

1. Hold the particle half mask in position over the nose and mouth.

2. Pull the upper strap over the head positioning it just above the ears. Pull lower strap over the head and fit around the back of the neck.

3. Ensure the nose clip is securely moulded around the nose, resting the ends against the cheek to obtain a good seal.

4. To check for proper fit, cup both hands over the mask and exhale vigorously. If air leaks around the nose, tighten the nose clip, if air leaks around the edge, reposition the headharness for better fit.

5.Repeat adjustments until the mask is sealed properly.

1597807431844866.png

Storage

The mask should not be removed from its package until it is required for use, and should be discarded after use.


Warnings

1. This mask marked “NR”, shall not be used for more than one shift.

2. Never substitute, modify, add, or omit parts in the configuration as specified by the manufacture.

3. This mask helps protect against certain particulate contaminants but does not completely eliminate exposure to the risk of contracting disease or infection.

4. Do not use the particle half mask with facial hair or any other conditions that may prevent a good face-seal, the requirements of leakage will not be achieved.

5. Discard and replace the mask if:

 a) The mask is removed whilst in the contaminated areas.

 b) Clogging of the mask causes breathing difficulties.

 c) The mask becomes damaged.


1597807407287260.png


Limitation

Do not use the respirator to enter or stay in a contaminated area under

the following circumstances:

a) Atmosphere contains less than 19.5% oxygen.

b) If you smell or taste contaminant.

c) For protection against gases or vapors.

d) Contaminants or their concentrations are unknown or immediately dangerous to life or health.

e) For sandblasting, paint-spray operations and asbestos treatment.

f) In explosive atmospheres.


Packing

1.png

222.png
Quantity/Box:20pcs/box

packing carton

480 pcs


The declaration of conformity:

AK001 符合性声明.pdf

01.jpg

Technical Support: 嘉选网络 | Admin Login
×